About Vehicular Natural Gas (NGV)

• The NGV is the same type of natural gas used in the industry, business and homes.
• Special cylinders are used to store NGV in a 100% gas state.
• NGV decreases operational and maintenance costs in forklifts and vehicles.

A. Official Requirements

B. Vehicle

C. Vehicle converted to CNG.

NOM-011-SECRE-2000 (Mexico)

• All the equipment should abide the security and quality procedures given by the producer.
• Conversion can be made on carburetor or fuel injection vehicles. And can use gasoline and natural gas (dual conversions)
• Cylinders and other components should be secured into the vehicle.

Vehicle conversion to CNG.

To convert a vehicle to CNG or NGV and guarantee up to a 30% reduction in relation to other fuels like gasoline or diesel, it is necessary to get acquainted with the equipment that will be installed in your vehicle by authorized shops.

Get to know with the conversion kit to be installed in your vehicle:

• Engine
• Board
• Trunk

See how a vehicle converted to CNG works

See how a vehicle converted to CNG works

• CNG CYLINDER
  Stores CNG. Manufactured of seamless steel they are prepared to operate with pressure levels ranging from 200 kgf/cm² to 250 kgf/cm².
• CYLINDER VALVE
  Installed at the cylinder gas outlet. Has safety devices for over pressure and quick closing.
• CONNECTION TUBES
  Hard high pressure tubes connect the CNG cylinder to the engine.
• PRESSURE REGULATOR
  It regulates pressure of CNG to the engine and has different regulating stages. Through these stages the cylinder pressure, varying according to consumption, is regulated to a steady and unique pressure for the operation of the engine.
• DISPLAY LEVEL OF COMBUSTIBLE SELECTION INDICATOR
  Operates combustible changes electrically from the interior of the vehicle. Indicates CNG level available in the storage cylinder of the vehicle.
• FILLING VALVE
  Multi-valve with quick closing supply device, that keeps CNG stored in the cylinder. Through this valve the vehicle is refueled with CNG.
• PRESSURE GAUGE
  It is a pressure indicator installed between the supply valve and pressure regulator to permanently measure and show cylinder CNG pressure. The amount of gas in the cylinder is in close relation to pressure, therefore the pressure gauge sends a signal and indicates on the panel the amount of CNG available.